اتصال+255 772 085 785البريد الإلكترونيinfo@ibsagro.co.tzNow sourcing the 2026/27 harvest
Mon–Fri 08:00–17:00 · Sat 08:00–13:00 EAT
طلب عرض سعر
التبديل إلى English
الخدمة 04

نظرة عامة

Grading classifies cleaned produce by the characteristics a buyer pays for — size, uniformity, colour, moisture, purity, defect level and, where relevant, variety. Inspection is the check that the classification is accurate and that the lot as a whole matches what will be written on the offer.

Sampling is done to a defined pattern across the lot rather than from whichever sack is nearest, because a single convenient sample tells you about that sack and nothing else. Samples are retained after despatch, so that any later question about the consignment can be answered against the material actually shipped.

Where a buyer, a letter of credit or an importing authority requires verification by an independent party, the company arranges and coordinates that inspection before shipment, and makes the lot, the records and the samples available to the inspector.

Hands working a spread of maize on a grading board with tweezers, a separated portion set to one side

استفسر عن هذه الخدمة

أرسل السلعة والدرجة والكمية والتعبئة والوجهة التي تحتاجها وسنرد بعرض سعر مكتوب وجدول تسليم.

استفسارات المبيعات: info@ibsagro.co.tz

الهاتف: +255 772 085 785

النطاق

ما هو مشمول

كل ما يلي جزء من الخدمة كمعيار قياسي. أي شيء خارج ذلك يُسعَّر بشكل منفصل ويُذكَر كتابيًا قبل بدء العمل.

  • Sampling to a defined pattern across the whole lot
  • Moisture determination
  • Assessment of purity, foreign matter and defective units
  • Size, uniformity and colour assessment against the specification
  • Classification into the agreed grade
  • Visual check for infestation, mould and off-odour
  • Written grade and inspection record for each lot
  • Retained samples held against the despatched consignment
  • Coordination of independent third-party inspection where required
  • Pre-shipment verification before release for loading
الملاءمة

لمن هذه الخدمة

  • Contract buyers

    Buyers purchasing against a written specification who need documented evidence that the lot conforms before it ships.

  • Buyers under letters of credit

    Importers whose payment terms require an inspection certificate issued by a named independent party.

  • Processors with tight tolerances

    Industrial users whose process depends on uniform size, moisture and purity from delivery to delivery.

العملية

كيف يعمل الأمر

يُتَّبع التسلسل أدناه في كل شحنة، وتُسجَّل كل خطوة بحيث يمكن إعادة تجميع الشحنة لاحقًا.

  1. Confirm the standard

    The grade definition to be applied is confirmed with the buyer, including tolerances for moisture, purity and defects.

  2. Draw samples

    Samples are taken across the lot to a defined pattern, combined and reduced to a representative working sample.

  3. Assess

    Moisture, purity, defects, size, uniformity and condition are assessed against the confirmed standard.

  4. Classify and record

    The lot is assigned its grade and a written inspection record is raised. Samples are retained and labelled to the lot.

  5. Verify before shipment

    The lot is re-checked before loading and, where required, presented to an independent inspector for certification.

تحتاج إلى grading & quality inspection؟

أرسل لنا متطلبك — السلعة، والدرجة، والكمية، والتعبئة، والوجهة — وسيرد فريقنا بعرض سعر مفصل.